MRG-5202-41 (4L)
油脂稀油一体润滑油泵PLC型 Self-control Grease and Thin Oil Lubrication Pump with PLC Type
下图为4 L金属油箱,材质为铁或铝,
另有6 L、8 L、1 0 L等容积可选。
The picture showed as below is metal tank with 4L,
the material is iran ans aluminium, it has 6L,8L and 10L can be choosen.
技术参数Technical Parameters
型号 Model | 电压频率 Voltage | 额定转速 Rated ritary Speed | 功率 Power | 电流 Current(A) | 额定压力 Rated pressure kgf/cm² | 更大压力 Max pressure kgf/cm² | 容积 Volume | 吐出量 Discharge capacity ml/min | 使用油粘度 Rated pressure kgf/cm² | 备注 Remarks |
MRG-5202-4100T | 220V 50/60HZ | 2800 | 60W: 220V 90W: 380V | 60W:0.45 90W:0.32 | 20 | 60 | 4L | 300-500 CC/min | 30#稀油~00#油脂 | MR-5202代表 电压220V MR-5203代表 电压380V |
MRG-5202-4100X | 220V 50/60HZ | |||||||||
MRG-5202-4110X | 220V 50/60HZ |
*型号带T为抵抗式,带X为容积式,不带" A"为异步电机
*Mode name with " T" is resistant, mode name with “X” is volumetric,without A is asynchronous motor
性能与特点Performance Characteristics
1 .供油和间歇时间同主机电脑控制设定。
2 .油箱容量有2、3、4、5升等,吐出量300-500CC/min,油箱有目视油位计和自动控油装置,当油量不足时,红灯亮,提醒加油。
3 .油泵里面内设两个阀(一个调压阀,一个缷压阀)
4 .可根据客户需求定制专属金属油箱
(可根据客户需要定做专属润滑方案)
1.Oil supply and intermittent time are adjustable by PC controller.
2.With the out of oil 300~500CC/min, the oil tank capacity has 2, 3 and 4 litre, etc.
There are oil level gauge and automatic oil control device on the oil tank.
The red light is on when the oil quantity is insufficient, which reminds you to fill it up.
3.There are two valves in the oil pump, pressure regulating valve and unloading valve. (refer to figure 1-3)
4.Metal oil tank can be customized.
(specific lubrication plan can be customized)
面板图 The control panel
接线图The wiring diagram